Suzhou Casion International Trading Co., Ltd.
Type: Extrusion Blow Molding Machine
Raw Material: HDPE
Making Method of Parison: Extrusion-Blow Molding
Certification: CE, ISO9001:2008, QS
Place of Origin: china
Brand : KHX-MACHINE
Preform feeding and loading unit
The design of the recycling unit prevents the preforms from getting bound up in the unscrambler. The star wheel design of the feeding unit provides the lowest possible changeover times for switching to different perform sizes.
A mandrel capable of turning 180 degrees guarantees uniform neck section during the heating. A unique oven ventilation system enables the DMK-R series blower to handle various difficult applications easily.
Power saving: heater is fixed with link of short section, which assures to heat more performs with the same heating length. In this way, it saves electricity of 25%
Technical Data forBlow Molding KHX-260-120
1. General Issues
Machineoperating manual including Hydraulic, Pneumatic, Assembly drawing, Coolingwater.
Max.volume of product: single cavity 260L Total weight 35 ton 3.5-4.5bars
Max. output 20pcs/h (220L product net weight 10.5Kg,Sufficientcooling water temperature at
8℃ with an intake pressure of between3.5 to 4.5 bars, with a Min. difference between intake and outlet of 3 bars. )
2. Clamping Unit
Principle: bi-direction synchronous clampingdevice with double axis.
Linearroller guidance horizontal.
Moldplatens H x W 1500 x 1000 mm
Distancebetween the p;atens: 750-1750mm
Clampingunit stroke: 1000mm
3. Die Head
Typeof die head: Double lays head of accumulator.
Max mouth diameter: 180-400MM
Max.Storage volume: 20L
Typeof temperature sensors: K
100point WPS systerm controller (B&R)
4. Extruder System
Extrudershould be adequate to work with HDPE
Nitridetreatment barrel and screw.
Plasticizingefficiency: 400 kg/h (HDPE)
Feedingzone grooved with cooling water
Cast-aluminium heater, adopt European mode ofconnection
Typeof temperature sensors:
DC motor drive: 132KW
Coolingby 5 cooling fans.
Raw material hopper with awindow.
Blowsystem mounted on linear guide under the mold.
Heightadjustment mechainsm 250 mm
Blow pin up/down stroke: 150 mm , controlledby hydraulic cylinder
Mechanical adjustment for left and right
6. Take out system
Takeout stroke 1600 mm
Adopt lear guide and synchronous belttransmission of motor to advance and retreat
Gripper with the function: auto coolingwater
Hydraulic working pressure 100 -150 bar
Hydraulicsystem servo pump : 220 L/min
Oil Temperature sensor showing the screen
Motor power: 22KW
Pistonpump:YUken (YUKEN--From Japan)
Threads ofhydraulic block use of screw joint GE(ISO 1179)
8. Pneumatic System
Pneumatic valves AIRTEC
Max. pressure of all components: 10 bar
Max. pressure of gauge: 6-8bar
ServoWDS control system: B&R100point.
Full color 12.4"
Fullcolor 12.4" screen.
Recipeand machine data storage on memory stick (CF)
Emergencystop push buttons (rotationally release) without key
Allelectric components needs to be for power supply 220V/380V, 50Hz, controllerDC24V,
Total rated power: 276 KW
Average energy consumption: 110 KW
Main components(Air switch, Contactor) :Schneider intermediate relay: Schneider
Invertot of extuder motor: PARK
Linear transducer: Gefran
Allpipes for cooling water made of rubber material.
Separatecooling water circuit for Mold, Blow pin, Extruder feeding zone, Oil cooling.
Clamping unit should beforward: 600 mm, for Plastic Blow Molding Machine changing
Aluminum profiles for safety doors, with plastic window.
Machinecolor: according requirement of customer
Overall dimensions ofmachine LxWxH: 5.5 x 6.5 x 3.6 m
Looking for ideal Hand Blow Moulding Machine Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Bottle Blow Molding Machinery are quality guaranteed. We are China Origin Factory of Water Bottle Blow Molding Machine. If you have any question, please feel free to contact us.
Copyright © 2019 Suzhou Casion International Trading Co., Ltd. All rights reserved.